News Release

UCSD structural engineers design weld-free steel frame

Peer-Reviewed Publication

University of California - San Diego

Researchers at the University of California, San Diego’s (UCSD) Jacobs School of Engineering have applied post-tensioning, a technique commonly used in the construction of concrete buildings and bridges, to create a new class of weld-free steel-framed structures. The initial test conducted in 2001 on a large-scale assembly indicated that the post-tensioned steel frames can absorb strong earthquake motions with little or no damage.

Reporters will have the opportunity to see this concept in action during the next large-scale test in May-June 2002 at the Jacobs School’s Charles Lee Powell Structural Research Laboratories. This test will study the behavior of a post-tensioned steel frame supporting a concrete slab during earthquake-like conditions.

“By adding tremendous tension to rods that run horizontally through the beams and columns, squeezing them together like an elastic band, a steel frame can be constructed without welded joints,” says Andre Filiatrault, professor of structural engineering.

After the Northridge, California earthquake in 1994, it appeared that steel-framed structures had escaped unharmed. However, upon careful inspection it was discovered that the joints connecting the beams to the columns had lost structural integrity. These welded joints were fractured and had large cracks which propagated all the way through the columns. “The structures had very little resistance left and probably would have collapsed during another large quake,” explains Filiatrault.

Since 1994, much research has been underway to remedy the problem and the UCSD design offers one alternative solution. Says doctorate student Constantin Christopoulos: “Strong post-tensioned rods clamp the beams to the columns, holding them together. These high-strength rods provide the spring force, which allows the system to return to its initial position after it is deformed during an earthquake. But there is still a need to dissipate energy, so we introduced some unique sacrificial bars.” On the top and bottom of the beams where they meet the columns, a weaker sacrificial bar, contained in a cylinder to avoid buckling, slides back and forth during an earthquake. Another unique feature is that the behaviors of the structure can be modified as its function changes over time something that cannot be done with welded joints.

The initial real-time test in 2001 was conducted on a three-column, two-beam assembly. The results validated the behavior of the proposed weld-free connection in a frame system under realistic earthquake loads. The loads were representative of the displacement expected between two adjacent floors of a building during a strong earthquake. No structural damage was detected from sensor data or post-test inspection. As they prepare for the May-June 2002 large-scale test, Filiatrault and Christopoulos are collaborating with Professor Chia-Ming Uang who continues to be a valuable resource on steel design issues.

According to Filiatrault, various forms of post-tensioning have been used on concrete structures for many years, but never on steel-framed structures. “This concept should really benefit the steel industry. One or two workers can add tension to the rods and squeeze the frame together very quickly. This may equate to less “dead time” and cost savings,” says Filiatrault.

###

Media Contact: Troy Anderson, 858-822-3075 or tdanderson@ucsd.edu
Video and images are available at http://www.soe.ucsd.edu/news_events/news_2002/20020402.html


Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert system.