News Release

University of the Basque Country researcher makes progress in optimizing solid oxide fuel cells

Book Announcement

Elhuyar Fundazioa

While our standard of life increases, so does the worldwide energy demand. In this vein, the application of technologies based on fuel cells is put forward as an alternative to the massive consumption of fossil fuels. One of the fuel cells of greatest current interest is the solid oxide one.

The PhD thesis by researcher at the University of the Basque Country (UPV/EHU), Ms Ana Martínez Amesti, focused on optimising solid oxide fuel cells, one of the most promising technologies of the future for various applications (residential, commercial, portable devices, electric power stations, and so on). The author has entitled her thesis Solid oxide fuel cells. Studies on reactivity and optimisation of cathode-electrolyte interlayer.

Solid oxide fuel cells are the type of cells most studied in recent years. They have basically two outstanding characteristics: the electrodes and the electrolyte are solid and the versatility in the choice of fuels and oxidants due to high operational temperatures. As regards problems arising with this kind of cell, there are also two important ones: on the one hand, the difficulties in manufacturing, given that the ceramic materials of which they are made require high temperatures for their processing and, on the other, in some cases, the solid electrolyte degrades easily at the cell's working temperature, thus affecting its stability.

Thus, the principal alternative for achieving the economically viable marketing of solid oxide fuel cells is to reduce their operating temperature. In this way, one of the requisites is having mixed conducting materials that can be used as cathodes at operating temperatures of between 550ºC and 800ºC.

Study of materials

Ms Martínez has studied the problem that presents mixed oxides employed in solid oxide fuel cells, given that these materials react on occasions with the electrolyte, diminishing the power of the cathodes. As a solution to this problem, Ms Martínez proposed including an interlayer between the material employed as a cathode and the electrolyte, with the objective of reducing the solid state reactions taking place and, thus, improving the electrochemical response of the system. According to the PhD author, the introduction of an interlayer between the cathode and the electrolyte considerably enhances the conducting properties of all the cathodes.

This precisely has been one of the main objectives of this research work: the study of the processes that occur in at the electrolyte-cathode interphase. Once these interactions were investigated, a process of optimisation of the interlayer parameters was carried out, such as the microstructure, porosity and thickness. Finally, Ms Martínez undertook basic research on durability, aimed at determining the degradation suffered by the cells studied with temperature and time of exposition.

###

About the author

Ms Ana Martínez Amesti (Ermua, 1978) is a graduate in Chemical Engineering and carried out her PhD thesis under the direction of Ms Mª Isabel Arriortua Marcaida and Ms Lide M. Rodríguez Martínez from the Department of Chemical Engineering at the UPV/EHU's Faculty of Science and Technology. She is currently working as a researcher at the same Department. While undertaking her PhD thesis, Ms Martínez had the support and help of the Ikerlan-Energy Technological Centre.


Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert system.