Public Release: 

Siberian scientists learned how to reduce harmful emissions from HPPs

Siberian Federal University


IMAGE: This is the results of modeled distribution of NOx in a combustion chamber: a) regular boiler, kg/m3; b) three-step combustion boiler with the use of mechanically activated micro-milled coal, g/m3... view more 

Credit: Alexander Dekterev

A team of scientists from Siberian Federal University (SFU) and their colleagues from Novosibirsk and the Netherlands modeled the process of coal burning in HPP boilers and found out which type of fuel produced less harmful emissions. The study was published in Fuel journal.

Heat power plants (HPPs) supply electrical energy to many cities in the world. The production of heat and electricity starts with burning coal in a combustion chamber. Generated heat warms up the steam and smoke mixture that moves the turbine. This is how electricity is produced, and the warmth is used for heating. However, when coal is burned at HPPs, harmful nitrogen oxides are released into the atmosphere.

One of the most prospective emission-cutting technologies is post-combustion or three-stage fuel combustion. After the first combustion stage during which the main part of the coal burns out and the air is scarce, the remains of the fuel are transferred to a special area above the combustion chamber. Additional fuel is also transported here. Nitrogen oxides react with the hydrocarbon forming hydrogen cyanide and molecular nitrogen, and the volume of nitrogen oxide emissions drops by about 10%.

"The environmental impact of oil and gas post-combustion is more evident, but we also have to work with coal. It has a great practical importance as many HPPs use it," explained Alexander Dekterev, a co-author of the article, candidate of technical sciences, and head of the department of thermal physics at SFU.

Many scientists conducted experiments in order to understand which properties of coal and combustion techniques allow for maximum emissions reduction. Recently physicists have offered to mill coal down not to average powder (with particle size of about 200 micron, like in facial powder) but to micro-particles (20-30 micron). This technique provides for a more stable flare in HPPs, as coal micro-particles are mixed better and burned quicker.

Previously this effect was demonstrated in small experimental boilers. The flame from the burning of coal micro-particles resembled that of burning oil, and the particles were almost invisible. Still it wasn't clear whether the effect would be the same in regular HPP boilers, and the scientists from Krasnoyarsk decided to model that.

They took a standard steam boiler BKZ-500-140 of Krasnoyarsk HPP-2 as a model, as all experimental data on it was available. The data were downloaded into the model and after that is was reconfigured taking the post-combustion into account. In the new model the basic fuel was brown Kansk-Achinsk coal, and the post-combustion fuel was formed by jet coal from Kuznetsk. According to initial calculations, the mathematical model implemented by the authors of the article in the in-house software correctly described the processes in the boiler.

The team modeled three burning schemes - with regular coal, micro-particle coal, and mechanically activated fuel. The latter variant proved to be preferable and led to 50% reduction in Nox emissions compared to the basic variant and by 20% to the regular coal.

The work might be of interest for developers and engineers working on the improvement of the existing boiler equipment and design of power blocks. The authors continue to develop mathematical modeling methods to improve burning technologies both for widely used and unconventional fuel types.


Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert system.