Toyohashi University of Technology researchers have discovered that non-flaming combustion (smoldering) of a porous specimen can sustain, even under nearly 1 % of atmospheric pressure. The thermal structure of a 2-mm-diameter burning specimen at very near extinction condition was successfully measured using an embedded ultra-fine thermocouple, clarifying the key issues that lead to fire extinction at low pressures. The outcome of this research will contribute to improved space exploration fire safety strategies.
Non-flaming combustion (i.e., smoldering) is an extremely slow burning process that emits toxic gas and white smoke during the burning event. This corresponds to the pre-flaming stage of burning a porous specimen, during which the blackened part grows, continuing the slow exothermic process. It eventually generates a flame that quickly accelerates the fire damage. Flaming combustion can be suppressed by reducing the pressure to nearly 1/3 of standard pressure (~30 kPa). Nevertheless, non-flaming combustion can sustain even at 1/100 of standard pressure (~1 kPa) if the ambient gas is fully-oxygenated. Extension of the critical pressure has been pointed out as an experimental fact; however, the actual reason is not known because it is extremely difficult to investigate the thermo-chemical status of near-critical conditions. Because the combustion intensity is very weak, sensor insertion may affect the status, resulting in failure to capture the actual physics.
A research group led by Professor Yuji Nakamura, from the Department of Mechanical Engineering at Toyohashi University of Technology, took on the challenge of measuring the temperature distribution of a smoldering thin rod in a pressure-controlled chamber at near-critical conditions. To make this possible, special care was taken to adjust the sensor while avoiding the potential failure described above. A tiny hole of 0.2-mm diameter was drilled through the fragile specimen. Then, a 50-micron R-type thermocouple was embedded into the hole. By achieving steady-state burning, even near the critical condition under a well-controlled experimental environment, a repeatable 1-D temperature profile was obtained along the axis.
The first author, Takuya Yamazaki, a PhD candidate, said, "No one could even consider drilling such a tiny hole into the 2-mm scale of the fragile specimen that we used, and then manually inserting the tiny thermocouple in it. Of course, no one has tried this before since it is clearly extremely difficult, and requires considerable patience and effort. In fact, I must admit, it was really exhausting to complete this task. Nevertheless, this provided us insight on the thermal status near the critical condition to thoroughly understand the extinction mechanism. For instance, combustion heat is first transferred along the axis by radiation, then part of the transferred heat shall be lost to ambient via natural convection when the total pressure is in the order of tens of kilo-pascals. Because the convective heat loss tends to be suppressed when the total pressure decreases, the heat transferred by radiation could remain in the specimen to avoid extinction. This fact has been demonstrated by this work for the first time ever because we are the first group to take on the 'super' challenge of measuring the precise temperature distribution of a smoldering specimen at near extinction."
"The present results are opened to the fire society simply owing to Takuya's personal devotion. This outcome suggests that the vacuumed operation to extinguish fire in space may fail unless the proper condition is achieved. Otherwise, smoldering would survive, and it would cause the fire to result in secondary damage to the cabin. This work is just the first step to propose a fire safety strategy (regulation) in outer space habitats to privatize space development", explains Professor Yuji Nakamura.
We use the term "smoldering" frequently, but, in reality, no one knows how a specimen burns to generate heat locally. It has been considered that surface oxidation is the source of heat generation, and that gas-phase reaction is not required to be considered. However, based on recent numerical predictions by a Chinese research team (a member of an international collaboration team led by Prof. Nakamura), it was found that a gas-phase gentle heat generation can support or promote surface oxidation.
To further the cause of understanding smoldering in low pressures, another international collaboration team in the United States, led by Prof. Nakamura, will assume the challenge to experimentally identify the reactivity in the gas-phase. This is a very important endeavor, because scant attention has been paid to the reaction status of the micro-pores of a burning specimen.
Funding agency: JSPS program "Overseas Challenge Program for Young Researchers"
Yamazaki, T., Matsuoka, T., and Nakamura, Y., "Near-extinction Behavior of Smoldering Combustion under Highly-vacuumed Environment", Proc. Combust. Inst., Vol.37, in print (DOI: 10.1016/j.proci.2018.06.200).
Toyohashi University of Technology
1-1 Hibarigaoka, Tempaku
Toyohashi, Aichi Prefecture, 441-8580, JAPAN
Inquiries: Committee for Public Relations
Toyohashi University of Technology, founded in 1976, is a National University of Japan and a leading research institute in the fields of mechanical engineering, advanced electronics, information sciences, life sciences, and architecture.