News Release

Sex in plants requires thrust

Peer-Reviewed Publication

World Scientific

Image Time Sequence

image: Time sequence of a growing pollen tube pushing against a PDMS cantilever. The tube from a trapped pollen grain emerges from a microchannel at the top of the image, touches the microcantilever at point A near the tip, gets caught in a nudge designed to prevent slippage, and deflects the perpendicularly oriented cantilever. view more 

Credit: Anja Geitmann

In a paper to be published in the September 2018 issue of TECHNOLOGY, the thrust produced by the microscopic organ delivering sperm cells in plants has now been measured using microfluidic technology.

A team of nano and microsystems engineers and plant biologists at the University of Montreal (now known as Université de Montréal), McGill University and Concordia University devised a microchip that enabled the researchers to measure how much force the sperm delivery tools used by plants exert when negotiating the female flower tissues to accomplish fertilization.

The fabrication of the lab-on-a-chip used to measure the growth force of the pollen tubes was highly complex since it involved the assembly of multiple layers of precisely designed elastomer material with a precision in the micrometer range. This type of study illustrates that ingenious research drawing from the expertise of multiple disciplines is required to understand microscopic biological processes. Reproduction in plants is crucial for our own survival since most of the calories we consume depend on it. Successful plant fertilization is at the basis of the formation of seeds such as rice, corn and wheat, as well as fruits and numerous vegetables. Failure to fertilize can therefore have dramatic economic and humanitarian consequences.

To mimic the biological maze of the flower tissue, the tools -- the pollen tubes -- were strategically guided into the microdevice and exposed to miniature force balances. When the tubes interacted with the gauge they deflected the device and the stalling force provided information on the amount of thrust the tiny cells are able to exert. The magnitude of this force suggests that the cellular pressure driving the invasion process corresponds to that of a typical car tire. Curiously, the pollen tubes changed the frequency or their oscillatory growth pattern suggesting that the cells "feel" and respond to the physical resistance of the environment.

Sperm cell delivery in plants shows many similarities with the analogous process in humans and animals. The egg cell in plants is deeply embedded in the female tissues and hence the delivery of the sperm cells by the male partner, the pollen grain, requires the formation of a protuberance that invades the female tissues. Contrary to the human counterpart, each plant male only delivers two sperm cells and the process ends with its death. "This is the reason why flowers form so many pollen grains" says senior author of the study, Anja Geitmann. The biological purpose of these microscopic spheres is the delivery of sperm cells from one flow-er to the next.

Unlike animal sperm cells, plant sperm cells are not motile, and therefore they have to be delivered directly to the egg cell for fertilization to occur. The growth of the delivery organ is therefore crucial. The female flower tissues represent a maze of formidable complexity through which the pollen tubes have to manoeuvre. Essential for target finding, the pollen tube is able to follow the guidance cues emitted by the female partner. "We have long suspected that the process requires not only a sophisticated navigation system but also substantial forces" explains Geitmann, "but just how much force this single cell can produce was unknown."

Concordia University Professor Muthukumaran Packirisamy adds "From a mechanical point of view, the process of pollen tube elongation is similar to that of a balloon catheter used for angioplasty -- forces are generated based on the principle of a hydroskeleton, or fluid under pressure. We designed a microscopic cantilever-based gauge against which the pollen tubes had to forcefully push in order to continue their elongation."

Microsystems technology was required to undertake this experiment due to the tiny size of pollen tubes and the consequently minute amount of force they exert to accomplish penetration. In big flowers, pollen tubes can become many centimeters long but independently of flower size the tubes are only between 5 and 20 micrometres wide. By way of comparison, a human hair is typically 100 micrometres thick.

The study was designed not only to quantitatively determine the invasive force of the pollen tube, but also to closely monitor its behavior upon the encounter with the physical object. The researchers observed that the characteristic oscillatory growth pattern of the cell was markedly altered by contact with the physical obstacle leading them to suspect that the tube perceives and is able to adapt its growth force depending on the mechanical impedance it encounters. Such tunable and sophisticated behavior by a single cell is fascinating and illustrates the complexity of the reproductive process, even in plants.

The team from McGill University is working now to further characterize the invasive behavior of the pollen tube to understand how the cellular growth machinery steers the growth direction towards its target, and how the cell interacts with the female tissues while the team at Concordia University continues the development of lab-on-a-chip for studying varying cellular behavior and properties.

###

This work was funded by the Fond de recherche du Québec - Nature et Technologies (FRQNT).

Corresponding authors for this study in TECHNOLOGY are Professor Anja Geitmann, Ph.D., geitmann.aes@mcgill.ca and Professor Muthukumaran Packirisamy, Ph.D., pmuthu@alcor.concordia.ca.

About the Authors

Mahmood Ghanbari

Mahmood Ghanbari was PhD student at Concordia University at the time the study was carried out.

Anja Geitmann

Dr. Geitmann was Professor at University of Montreal when the experimental work was carried and has since moved her lab to McGill University. Currently, she is Canada Research Chair in Biomechanics of Plant Development, Professor at the Department of Plant Science of McGill University, Dean of McGill's Faculty of Agricultural and Environmental Sciences, and Associate Vice-Principal of McGill's Macdonald Campus. She is the President of the International Association of Plant Sexual Reproduction Research. She is plant cell biologist and studies plant development and reproduction at the cellular level. Her research program combines cell biological approaches with high end imaging, micromechanical experimentation, and theoretical modeling to understand the mechanisms that gov-ern shape development in plant cells.

Muthukumaran Packirisamy

Dr. Packirisamy is Professor and Concordia Research Chair at the Department of Mechanical Engineering of Concordia University. His research is in the area of micro-electro-mechanical systems (MEMS), integrating microfluidics with microphotonics and nano features. Holding the position of Director of Micro Nano Bio Integration Center, he is the Fellow of Engineering Institute of Canada, Fellow of Canadian Academy of Engineering, Fellow of American Society of Mechanical Engineers, Fellow of Canadian Society of Mechanical Engineering and Fellow of Institution of Engineers (India).

Lab-on-a-Chip Technology can be used to grow, manipulate and characterize individual plant or animal cells in a single Chip. In this study, Packirisamy and Geitmann collaborated to design a Lab-on-a-Chip in which a rapidly growing plant cell deforms a microscopic cantilever used to measure the growth force. Controlling the growth and direction of the cell while also using surrounding structures as sensors makes it possible to estimate cell forces and monitor cell behavior. Lab-on-a-Chip technology has huge potential for cell sorting, cell (sperm/egg) selection, toxicology, pharmaceutical tests, study of mammalian cells and personalized medicine.

Links:

For more insight into the research described, readers are invited to access the paper on TECHNOLOGY.

IMAGE

Caption: Time sequence of a growing pollen tube pushing against a PDMS cantilever. The tube from a trapped pollen grain emerges from a microchannel at the top of the image, touches the microcantilever at point A near the tip, gets caught in a nudge designed to prevent slippage, and deflects the perpendicularly oriented cantilever.
Credit: Anja Geitmann

IMAGE

Caption: Scanning electron micrograph of the PDMS cantilever in the Lab-on-Chip device used to measure pollen tube invasive force.
Credit: Anja Geitmann and Mahmood Ghanbari

IMAGE

Caption: Scanning electron micrograph of two germinated Camellia pollen grains.
Credit: Anja Geitmann

About World Scientific Publishing Co.

World Scientific Publishing is a leading independent publisher of books and journals for the scholarly, research, professional and educational communities. The company publishes about 600 books annually and about 135 journals in various fields. World Scientific collaborates with prestigious organizations like the Nobel Foundation and US National Academies Press to bring high quality academic and professional content to researchers and academics worldwide. To find out more about World Scientific, please visit http://www.worldscientific.com.

For more information, contact Tay Yu Shan at ystay@wspc.com.


Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert system.