News Release 

Mathematics to keep farmers on track

Tokyo University of Agriculture and Technology

IMAGE

IMAGE: Solid and dashed lines respectively indicate stable and unstable steering; Trajectory A under V = 1.5 m s-1 and μs = 0.8; Trajectory B under V = 3.0 m s-1... view more 

Credit: Kenshi Sakai / TUAT

Tokyo, Japan - Scientists at the Tokyo University of Agriculture and Technology (TUAT) used nonlinear mathematical modeling to understand the bouncing and sliding instabilities that can led to tractor accidents. This research may help protect farmers from injury, as well as better control automated agricultural systems.

The research was published in Biosystems Engineering on Feb 12th, 2020 as "Numerical analysis of steering instability in an agricultural tractor induced by bouncing and sliding".

Accidents in which tractors overturn is a leading cause of death for farmers. This is especially concerning in regions that have uneven terrain. Repeated bumps of a specific frequency can lead to catastrophic bouncing or sliding instabilities. This resonant frequency reflects the natural oscillation period of the tractor, but when applied from an outside source, can cause vibrations with dangerously large amplitudes. Similar to an earthquake that can topple one building while leaving neighboring structures undamaged, one tractor may be safe to ride a certain route while another will be in danger of overturning. Moreover, even a slight increase in speed may start violent vibrations that cause the front wheels to lift off the ground, preventing proper steering.

The TUAT researchers used a mathematical bicycle model that represented the front and back wheels of the tractor as damped oscillators, and calculated the vertical and pitching motion of a trailing implement, such as a rotary tiller. The equations allowed the computer to calculate the motions of each component as part and simulate the overall stability based on the parameters of the system, like the stiffness of the wheel springs. Using frequency response analysis, which involved intensive numerical experiments for various parameter combinations, they showed that the stability of the tractor was strongly dependent on specific conditions, especially the travel speed of the tractor and the friction coefficient of the road. "As in many non-linear systems, the onset of instability is very sensitive to the control parameters," says first author Masahisa Watanabe. This means that small changes in velocity and friction coefficient can led to a discontinuous increase in bouncing and sliding.

"We included simulations based on actual accident case studies in Japan, and found that a large increase in nonlinear response can happen when the tractor attempts to climb a 19-degree slope," says senior author Kenshi Sakai. The right figure shows the tractor trajectories in the numerical experiments of the tractor operations on the passage slope of 19 degree. In the numerical experiments, the travel velocity V was respectively set at 1.5 and 3.0 m s-1 for the low and high velocity conditions and the static friction coefficient μs was respectively set at 0.8 and 0.4 for the preferable and adverse road conditions. When the travel velocity V was 1.5 m s-1, Trajectories A and C remained on the road throughout the simulation while there was steering instability for Trajectory C. When the travel velocity was V = 3.0 m s-1, the tractor trajectory dramatically deviated outward for Trajectories B and D. In particular, for Trajectory D, the steering instability continued until the tractor reached the edge of the road. This project aims not only to protect the safety of farmers, but also to advance the understanding of autonomous control theory.

###

This work was supported by JSPS Grant-in-Aid (No. 19J11183 and 19H00959).

Another paper related this research from the same authors was published in Biosystems Engineering on Apr 17th, 2019 as "Impact dynamics model for a nonlinear bouncing tractor during inclined passage" (https://doi.org/10.1016/j.biosystemseng.2019.03.013) .

About Tokyo University of Agriculture and Technology (TUAT):

TUAT is a distinguished university in Japan dedicated to science and technology. TUAT focuses on agriculture and engineering that form the foundation of industry, and promotes education and research fields that incorporate them. Boasting a history of over 140 years since our founding in 1874, TUAT continues to boldly take on new challenges and steadily promote fields. With high ethics, TUAT fulfills social responsibility in the capacity of transmitting science and technology information towards the construction of a sustainable society where both human beings and nature can thrive in a symbiotic relationship. For more information, please visit http://www.tuat.ac.jp/en/.

Contact:

Kenshi Sakai, Ph.D.
Professor, Department of Environment Conservation, Graduate School of Agriculture, TUAT, Japan
e-mail: ken@cc.tuat.ac.jp

Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert system.