News Release

Chance twists ordered carbon nanotubes into ‘tornado films’

Rice study uncovers new ways to make ordered wafer-scale chiral carbon nanotube architectures

Peer-Reviewed Publication

Rice University



Jacques Doumani is holding up a “tornado” film.

view more 

Credit: (Photo by Jeff Fitlow/Rice University)

HOUSTON – (Dec. 11, 2023) – Chiral materials interact with light in very precise ways that are useful for building better displays, sensors and more powerful devices. However, engineering properties such as chirality reliably at scale is still a significant challenge in nanotechnology.

Rice University scientists in the lab of Junichiro Kono have developed two ways of making wafer-scale synthetic chiral carbon nanotube (CNT) assemblies starting from achiral mixtures. According to a study in Nature Communications, the resulting “tornado” and “twisted-and-stacked” thin films can control ellipticity ⎯ a property of polarized light ⎯ to a level and in a range of the spectrum that was previously largely beyond reach.

“These approaches have granted us the ability to deliberately and consistently introduce chirality to materials that, until now, did not exhibit this property on a macroscopic scale,” said Jacques Doumani, a graduate student in applied physics at Rice and the lead author of the study. “Our methods yield thin, flexible films with tunable chiral properties.”

CNTs ⎯ hollow cylindrical structures made from carbon atoms ⎯ possess remarkable electrical, mechanical, thermal and optical properties. A single-wall CNT has a diameter approximately 100,000 times smaller than that of a single human hair.

The problem is that most ways to make CNTs in greater quantities ⎯ which is necessary for use in numerous applications ⎯ typically yield heterogeneous, disorderly nanotube assemblies. Such random architectures decrease a material’s overall performance.

The ability to create large enough quantities of films in which the nanotubes have the same diameter and orientation could fuel innovation across a broad range of domains, from information systems to medical or energy applications.

“In prior research, we showed that our vacuum filtration technique can achieve nearly perfect alignment of carbon nanotubes at significant scales,” said Kono, the Karl F. Hasselmann Professor in Engineering, professor of electrical and computer engineering and materials science and nanoengineering and one of the principal investigators of the paper. “This research allows us to take that work in an exciting new direction by introducing chirality.”

The discovery that motion could impart a chiral twist on an orderly CNT arrangement happened entirely by chance.

“It was, quite literally, an unexpected twist,” Doumani said, recounting how a shaky pump placed on the same table as the vacuum filtration system caused unintended vibrations which wound the layer of aligned CNTs into a tornadolike spiral.

“These vibrations had a profound impact on the architecture of the assembled carbon nanotubes, prompting us to explore and refine this newfound phenomenon further,” he said. “This chance discovery allowed us to recognize that we can design carbon nanotube architectures with desired characteristics by adjusting rotation angles and shaking conditions.”

Kono likened the resulting chiral symmetry of the CNT assemblies to a “work of art.”

“I am particularly proud of Jacques for pursuing the discovery that we can combine carbon nanotube filtration and shaking to tune the characteristics of these wafer-scale films,” Kono said.

The second method of achieving chirality involved stacking highly aligned CNT films at an angle by controlling the number of layers and twisting angles.

“We achieved a remarkable milestone in the deep ultraviolet range, where we set a new record for ellipticity,” Doumani said. “What’s more, compared to competitors in this space, our technique is very simple to set up. We don’t need a complex system to make these films.”

The techniques can be used to engineer materials for new optoelectronic devices, such as LEDs, lasers, solar cells and photodetectors. It’s also a setup that can potentially be used to make wafer-scale chiral film using other nanomaterials such as boron nitride nanotubes and tungsten diselenide nanotubes.

“This discovery holds promise for various applications,” Doumani said. “In pharmaceuticals and biomedicine, it offers potential in biosensing, deep-sea imaging and identifying useful compounds. In communication, it could enhance missile detection, secure communication channels and bolster anti-interference capabilities. In quantum computing engineering, it paves the way for more deterministic photon-emitter coupling.

“We’re excited to extend this technique to other types of nanomaterials as well.”

The research was supported by the National Science Foundation (2321366, 2235267, 2230727), the Robert A. Welch Foundation (C-1509, C-1668), the Air Force Office of Scientific Research (FA9550-22-1-0382), the Chan Zuckerberg Initiative (WU-21-357), the Department of Energy (DE-AR0001015), the Japan Society for the Promotion of Science (JP20H02573, JP21H05017, JP22H05469, JP23H00259, JPJSJRP20221202, JP22H00283), the Japan Science and Technology Agency (JPMJCR1715) and the Taiwan Yushan Fellow Program.


This release can be found online at

Follow Rice News and Media Relations via Twitter @RiceUNews.

Peer-reviewed paper:

“Engineering chirality at wafer scale with ordered carbon nanotube architectures” | Nature Communications | DOI: 10.1038/s41467-023-43199-x

Authors: Jacques Doumani, Minhan Lou, Oliver Dewey, Nina Hong, Jichao Fan, Andrey Baydin, Keshav Zahn, Yohei Yomogida, Kazuhiro Yanagi, Matteo Pasquali, Riichiro Saito, Junichiro Kono and Weilu Gao

Image downloads:
CAPTION: Jacques Doumani is holding up a “tornado” film. (Photo by Jeff Fitlow/Rice University)
CAPTION: Rice University scientists in the lab of Junichiro Kono have developed two ways of making wafer-scale synthetic chiral carbon nanotube assemblies starting from achiral mixtures. (Photo by Jeff Fitlow/Rice University)
CAPTION: Jacques Doumani is a graduate student in applied physics at Rice and the lead author of a study published in Nature Communications. (Photo by Jeff Fitlow/Rice University)
CAPTION: Graphic illustration of carbon nanotubes. (Image courtesy of Jacques Doumani/Rice University)
CAPTION: Junichiro Kono is Rice’s Karl F. Hasselmann Professor in Engineering, professor of electrical and computer engineering and materials science and nanoengineering and one of the principal investigators of the paper.

Related stories:

Junichiro Kono and team receives $1.5m PIRE grant from NSF:

Rice wins Moore Foundation grant for quantum vacuum research:

Odd angles make for strong spin-spin coupling:


Kono lab:
Department of Electrical and Computer Engineering:
George R. Brown School of Engineering:

About Rice:

Located on a 300-acre forested campus in Houston, Rice University is consistently ranked among the nation’s top 20 universities by U.S. News & World Report. Rice has highly respected schools of architecture, business, continuing studies, engineering, humanities, music, natural sciences and social sciences and is home to the Baker Institute for Public Policy. With 4,574 undergraduates and 3,982 graduate students, Rice’s undergraduate student-to-faculty ratio is just under 6-to-1. Its residential college system builds close-knit communities and lifelong friendships, just one reason why Rice is ranked No. 1 for lots of race/class interaction, No. 2 for best-run colleges and No. 12 for quality of life by the Princeton Review. Rice is also rated as a best value among private universities by Kiplinger’s Personal Finance.

Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert system.