Harnessing renewable lignocellulosic potential for sustainable wastewater purification
Research
image: IMAGE: SCHEMATIC DIAGRAM OF THE SUSTAINABLE UTILIZATION OF WASTE LIGNOCELLULOSE XR IN THE FIELD OF WASTEWATER TREATMENT.
Credit: Research
The contamination and scarcity of drinkable water resources have seriously plagued human survival and development worldwide. The recovery of drinkable water from wastewater is an essential way to achieve the United Nations Sustainable Development Goal 6 (Clean Water and Sanitation). However, most wastewater remediation materials rely on petrochemical resources and have several drawbacks, such as high cost and adverse environmental toxicity. The use of renewable, inedible and inexpensive lignocellulosic resources for wastewater remediation can liberate us from the dependence on fossil resources, which has broad application prospects.
The group of Tong-Qi Yuan at Beijing Forestry University proposed a sustainable utilization strategy for waste lignocellulose. Under the principle of no waste, all components of industrial xylose residue (XR) were upgraded into three kinds of wastewater remediation materials: flocculant, adsorbent, and photocatalyst. These materials were compatible with each other, which could stepwise purify high-hazardous mineral processing wastewater into drinkable water.
Firstly, a new functional type DES (methyl acryloyloxyethyl trimethylammonium chloride /acrylic acid/aluminium chloride) was used to deconstruct XR and enhance functionalities by introducing customized functional groups into various components in situ. Subsequently, lignin-containing cellulose nanofiber (LCNF) could be obtained by simple physical homogenization of the carboxyl-modified cellulose residue, which was used as a carbon source and biological template to prepare high-performance photocatalyst CN-1. During the low-temperature calcination (350 ℃), the lignin-rich in carboxyl and quaternary ammonium salt groups retained part of the carboxyl groups, and significantly increased the specific surface area through the large amount of gas generated by the pyrolysis of the quaternary ammonium salt, finally obtaining porous biochar C-350 with carboxyl groups. More importantly, DES-based flocculant DBF-25 was prepared by in-situ self-catalytic copolymerization using DES effluent rich in lignin fragments as raw material.
After three sequential purification steps by DPL-25, C-350 and CN-1 respectively, the lead-zinc mineral processing wastewater met the strictest limits of mainstream standards for drinking water, including the removal of 99.81% of suspended solids, almost all various heavy metal ions, and 97.09% CODMn. In addition, a series of simulated wastewater purification tests verified the tolerability and universality of the three wastewater remediation materials. For China alone, the annual output of XR is 40 million tons45. It is roughly estimated that 4.76×1010 tons of wastewater can be purified into drinkable water, which exceeds 74% of China's total annual wastewater discharge (6.39×1010 tons, including industrial wastewater and domestic sewage). This paper contributes solidly to the global water–renewable resource nexus, and provides promising blueprints for alleviating ever-mounting challenges posed by the water crisis and resource scarcity while achieving sustainable development.
Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert system.