image: Transparent bamboo laced with tungsten–vanadium oxide switches sunlight on demand, outperforming single-pane glass in nationwide building simulations
Credit: College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha 410004, China
Buildings devour roughly 40% of global final energy, and windows are the weakest thermal link. Glass invites glare, summer overheating and winter heat loss; double-glazing helps but raises cost, weight and embodied CO2. Now a multidisciplinary team has fabricated a biodegradable window from one of the planet’s fastest-growing plants—bamboo—that behaves almost like living skin, darkening when hot and clearing when cool.
Writing in the Journal of Bioresources and Bioproducts, the authors detail a surprisingly simple route: soak flattened bamboo boards in peroxyacetic acid at 60 °C for six hours to dissolve light-absorbing lignin while sparing load-bearing cellulose and hemicellulose, then compress the delignified mat at 20 MPa and 35°C until its thickness shrinks 80%. The resulting slab is denser (1.33 g cm-3) than untreated bamboo yet retains the original nanofibril alignment, yielding record tensile strength of 870 MPa—triple that of natural bamboo and higher than any previously reported transparent biomass material. Three-point bending gives 276 MPa flexural strength and 16.9 GPa modulus, while impact toughness reaches 6.35 J cm-2, enough to shrug off blows that would shatter glass.
Although lignin removal turns the material white, the tight packing of index-matched cellulose pushes visible-light transmission to 78% with a useful 86% haze that scatters glare and evens indoor illumination. When a 10 µm skin of polylactic acid containing 200 nm W-VO2 particles is blade-coated onto the surface, the window acquires thermochromic intelligence. At 20°C the coating transmits 42% of visible and 55% of near-infrared light; at 50°C the VO2 switches to a metallic phase, cutting solar heat gain by 9.7% without compromising daylight.
EnergyPlus modelling of a 5 m × 5 m × 3 m single-zone building fitted with 10 m2 of the smart bamboo shows annual HVAC savings of 5.58% in Guangzhou’s hot-summer zone, 3.2% in Nanjing’s mixed climate and 1.6% in Beijing, while Harbin’s severe-cold region gains only marginal benefit. Cradle-to-gate life-cycle assessment per cubic metre shows the composite reduces global-warming potential by 35%, particulate-matter formation by 46% and human-toxicity indicators by 40–60% relative to ordinary single glass, and performs even better against Portland cement. End-of-life biodegradation returns W-VO2 particles for recovery, eliminating landfill waste.
The authors say the process can be scaled with existing bamboo-panel lines and continuous roll-to-roll coating, potentially delivering 2 m × 1 m panes at costs competitive with low-E glass once production exceeds 10,000 m2 yr-1. They caution that long-term UV stability and fire performance must still meet building codes, but note that cellulose’s intrinsic char-forming behaviour could offer natural flame retardancy. If adopted widely, they estimate that retrofitting China’s 40 billion m2 of building façade with such windows could save 150 TWh of electricity annually—roughly the output of the Three Gorges Dam.
See the article:
DOI
https://doi.org/10.1016/j.jobab.2025.11.001
Original Source URL
https://www.sciencedirect.com/science/article/pii/S2369969825000702
Journal
Journal of Bioresources and Bioproducts
Journal
Journal of Bioresources and Bioproducts
Method of Research
Experimental study
Subject of Research
Not applicable
Article Title
Sustainable Transparent Bamboo/W-VO2 Composites for Solar Modulation and Energy-Efficient Buildings
Article Publication Date
12-Nov-2025