image: Mn/Mo co-doping induces charge redistribution in IrRuOx, generating electron-enriched Ru sites and a stable Ir4+-dominated framework, thereby suppressing lattice-oxygen participation and locking acidic OER to a durable adsorbate-evolution pathway. As a result, IrRuMn0.05Mo0.05Ox enables PEM water electrolysis at 1.77 V @ 3.0 A cm−2 for over 5200 h with a low decay rate of 36.5 μV h−1
Credit: Cui Hang from Dalian Jiaotong University and Songshan Lake Materials Laboratory
A research team led by Professor Lifeng Liu from the Dongguan Institute of Materials Science and Technology, Chinese Academy of Sciences, and Songshan Lake Materials Laboratory, in collaboration with the teams of Professor Hong Zhao at Sichuan University of Science and Engineering and Professor Yong Zhang at Dalian Jiaotong University, has developed a highly active and durable oxygen-evolution catalyst by co-doping Mn and Mo into iridium-ruthenium mixed oxides. By synergistically tuning the electronic structures of Ir and Ru while suppressing detrimental lattice-oxygen participation, the catalyst enables proton exchange membrane water electrolysis at 3.0 A cm-2 for more than 5200 hours, while maintaining a low cell voltage and minimal performance degradation. This work provides a promising strategy for designing durable electrocatalysts for green hydrogen production under industrially relevant current densities.
Proton exchange membrane water electrolysis (PEMWE) is considered one of the most promising technologies for producing green hydrogen from renewable electricity because of its rapid dynamic response, compact design, high-purity hydrogen output, and ability to operate at high current densities. However, large-scale deployment remains limited by sluggish oxygen evolution reaction (OER) at the anode and limited durability of catalysts under strongly acidic and oxidative conditions. Iridium oxide is currently the one of the most widely used stable OER catalysts in PEM electrolyzers, but the scarcity and high cost of Ir restrict its broader application. Ruthenium oxide, offer higher intrinsic activity and greater abundance, but Ru is susceptible to to over-oxidation and dissolution OER, including the formation of soluble RuO4 species. Another major challenge arises from oxygen evolution pathway itself. Although the lattice oxygen mechanism (LOM) can enhance catalytic activity, repeated extraction and replenishment of lattice oxygen may destabilize the oxide framework and accelerate metal dissolution. Achieving high catalytic activity, suppressed lattice-oxygen participation, and long-term durability at practically high current densities therefore remains a major challenge.
The Solution: The researchers developed a Mn/Mo co-doped IrRu mixed-oxide catalyst, denoted as IrRuMn0.05Mo0.05Ox, using a facile sol-gel method followed by thermal calcination. Introducing small amounts of Mn and Mo induces cooperative electronic regulation within the IrRuOx lattice. X-ray photoelectron spectroscopy and X-ray absorption spectroscopy reveal that co-doping stabilizes high-valence Ir sites while increasing the electron density around Ru. These changes produce complementary effects: stabilized Ir centers help preserve the oxide framework under strongly oxidative conditions, whereas electron-enriched Ru sites retain high intrinsic OER activity while becoming less susceptible to excessive oxidation and dissolution.
The optimized catalyst requires an overpotential of only 230 mV to reach 10 mA cm-2 in acidic electrolyte and sustains oxygen evolution for 5500 hours at this current density with only a small increase in operating potential. Stable operation is also maintained for 350 hours at 100 mA cm-2. Isotope-labeling differential electrochemical mass spectrometry further showed that lattice-oxygen participation remains very limited, accounting for only 1.63–2.38%. at ~ 20 mA cm-2 and 3.3–3.4% even at ~500 mA cm-2. These results indicate that oxygen evolution proceeds predominantly through the absorbate evolution mechanism (AEM) rather than the lattice oxygen mechanism, allowing rapid catalysis without substantial disruption of the oxygen lattice.
Density functional theory calculations support this interpretation. Mn/Mo co-doping reduces the energy requirement for the key O–O bond-forming step from 1.5 to 0.59 eV while increasing the calculated Ru dissolution energy to 2.49 eV. Together, these effects provide a molecular-level explanation for the enhanced catalytic activity and long-term stability.
The Future: The researchers further incorporated IrRuMn0.05Mo0.05Ox into a membrane electrode assembly to evaluate its performance under conditions closer to practical PEM water electrolysis. At 80 °C, the electrolyzer requires cell voltages of only 1.58, 1.68, and 1.77 V to reach current densities of 1.0, 2.0, and 3.0 A cm-2, respectively, meeting the 2026 U.S. Department of Energy target of 1.80 V @ 3.0 A cm-2. More significantly, the device operated at 3.0 A cm-2 for 5200 hours, with a voltage increase of only approximately 190 mV, corresponding to a degradation rate of 36.5 μV h-1. Structural characterization after operation confirmed that the rutile Ir/Ru oxide framework was largely preserved, with no detectable formation of new crystalline phases or obvious micron-scale segregation of Ir, Ry, mn or Mo.
Future research will focus on reducing the Ir content and areal Ir loading, clarifying Mn/Mo interactions under fluctuating renewable-power conditions, developing additional operando techniques to investigate oxygen evolution and catalyst degradation, scaling-up catalyst synthesis toward the hundred-gram level, and using machine-learning-assisted algorithm to identify new multicomponent Ir/Ru oxide catalysts.
This Mn/Mo co-doped IrRuOx catalyst demonstrates how fine-tuning the electronic structure and metal–oxygen interactions can overcome the conventional activity-stability trade-off in acidic oxygen evolution. Instead of enhancing catalytic activity by activating lattice oxygen, the catalyst maintains an adsorbate-dominated oxygen evolution pathway even at high current densities, while simultaneously suppressing Ru over-oxidation and dissolution. The electron-enriched Ru sites promote OER intermediate conversion, while the stabilized high-valence Ir sites reinforce the Ir–O framework. When translated from conventional three-electrode measurements to a practical membrane electrode assembly, this design enables stable PEM water electrolysis at 3.0 A cm-2 for more than 5000 hours, demonstrating its considerable potential for high-throughput green hydrogen production.
The Impact: This work provides a new strategy for resolving the long-standing activity-stability trade-off in Ir/Ru-based acidic OER catalysts.
The research has been recently published in the online edition of Materials Futures, a prominent international journal in the field of interdisciplinary materials science research.
Reference: Hang Cui, Hengyu Li, Jingwei Wang, Binwen Zeng, Kaiyang Xu, Haoliang Huang, Fei Lin, Liyuan Zeng, Pengyue Shan, Chenyue Zhang, Jing Sun, Wei Liao, Run Ran, Yong Zhang*, Hong Zhao* and Lifeng Liu*. Locking the adsorbate-evolution pathway against lattice-oxygen participation via Mn/Mo co-doping of IrRuOx for ultrastable acidic oxygen evolution at high current densities.
Journal
Materials Futures
Article Title
Locking the adsorbate-evolution pathway against lattice-oxygen participation via Mn/Mo co-doping of IrRuO x for ultrastable acidic oxygen evolution at high current densities
Article Publication Date
28-Oct-2026