Correction: (March 29, 2023) In the eighth paragraph, “40F” should be “about 7F.” An edit has been made in the press release to correct this information.
INDIANAPOLIS, March 26, 2023 — The cold blast of an air conditioner can be a welcome relief as temperatures soar, but “A/C” units require large amounts of energy and can leak potent greenhouse gases. Today, scientists report an eco-friendly alternative — a plant-based film that gets cooler when exposed to sunlight and comes in a variety of textures and bright, iridescent colors. The material could someday keep buildings, cars and other structures cool without requiring external power.
The researchers will present their results at the spring meeting of the American Chemical Society (ACS). ACS Spring 2023 is a hybrid meeting being held virtually and in-person March 26–30 and features more than 10,000 presentations on a wide range of science topics.
“To make materials that remain cooler than the air around them during the day, you need something that reflects a lot of solar light and doesn’t absorb it, which would transform energy from the light into heat,” says Silvia Vignolini, Ph.D., the project’s principal investigator. “There are only a few materials that have this property, and adding color pigments would typically undo their cooling effects,” Vignolini adds.
Passive daytime radiative cooling (PDRC) is the ability of a surface to emit its own heat into space without it being absorbed by the air or atmosphere. The result is a surface that, without using any electrical power, can become several degrees colder than the air around it. When used on buildings or other structures, materials that promote this effect can help limit the use of air conditioning and other power-intensive cooling methods.
Some paints and films currently in development can achieve PDRC, but most of them are white or have a mirrored finish, says Qingchen Shen, Ph.D., who is presenting the work at the meeting. Both Vignolini and Shen are at Cambridge University (U.K.). But a building owner who wanted to use a blue-colored PDRC paint would be out of luck — colored pigments, by definition, absorb specific wavelengths of sunlight and only reflect the colors we see, causing undesirable warming effects in the process.
But there’s a way to achieve color without the use of pigments. Soap bubbles, for example, show a prism of different colors on their surfaces. These colors result from the way light interacts with differing thicknesses of the bubble’s film, a phenomenon called structural color. Part of Vignolini’s research focuses on identifying the causes behind different types of structural colors in nature. In one case, her group found that cellulose nanocrystals (CNCs), which are derived from the cellulose found in plants, could be made into iridescent, colorful films without any added pigment.
As it turns out, cellulose is also one of the few naturally occurring materials that can promote PDRC. Vignolini learned this after hearing a talk from the first researchers to have created a cooling film material. “I thought wow, this is really amazing, and I never really thought cellulose could do this.”
In recent work, Shen and Vignolini layered colorful CNC materials with a white-colored material made from ethyl cellulose, producing a colorful bi-layered PDRC film. They made films with vibrant blue, green and red colors that, when placed under sunlight, were on average about 7 F cooler than the surrounding air. A square meter of the film generated over 120 Watts of cooling power, rivaling many types of residential air conditioners. The most challenging aspect of this research, Shen says, was finding a way to make the two layers stick together — on their own, the CNC films were brittle, and the ethyl cellulose layer had to be plasma-treated to get good adhesion. The result, however, was films that were robust and could be prepared several meters at a time in a standard manufacturing line.
Since creating these first films, the researchers have been improving their aesthetic appearance. Using a method modified from approaches previously explored by the group, they’re making cellulose-based cooling films that are glittery and colorful. They’ve also adjusted the ethyl cellulose film to have different textures, like the differences between types of wood finishes used in architecture and interior design, says Shen. These changes would give people more options when incorporating PDRC effects in their homes, businesses, cars and other structures.
The researchers now plan to find ways they can make their films even more functional. According to Shen, CNC materials can be used as sensors to detect environmental pollutants or weather changes, which could be useful if combined with the cooling power of their CNC-ethyl cellulose films. For example, a cobalt-colored PDRC on a building façade in a car-dense, urban area could someday keep the building cool and incorporate detectors that would alert officials to higher levels of smog-causing molecules in the air.
The researchers acknowledge support and funding from Purdue University, the American Society of Mechanical Engineers, the European Research Council, the Engineering and Physical Sciences Research Council, the Biotechnology and Biological Sciences Research Council, the European Union and Shanghai Jiao Tong University.
A recorded media briefing on this topic will be posted Monday, March 27, by 10 a.m. Eastern time at www.acs.org/acsspring2023briefings. Reporters can request access to media briefings during the embargo period by contacting firstname.lastname@example.org.
For health and safety information for ACS Spring 2023, please visit the FAQ webpage.
The American Chemical Society (ACS) is a nonprofit organization chartered by the U.S. Congress. ACS’ mission is to advance the broader chemistry enterprise and its practitioners for the benefit of Earth and all its people. The Society is a global leader in promoting excellence in science education and providing access to chemistry-related information and research through its multiple research solutions, peer-reviewed journals, scientific conferences, eBooks and weekly news periodical Chemical & Engineering News. ACS journals are among the most cited, most trusted and most read within the scientific literature; however, ACS itself does not conduct chemical research. As a leader in scientific information solutions, its CAS division partners with global innovators to accelerate breakthroughs by curating, connecting and analyzing the world’s scientific knowledge. ACS’ main offices are in Washington, D.C., and Columbus, Ohio.
To automatically receive news releases from the American Chemical Society, contact email@example.com.
Note to journalists: Please report that this research was presented at a meeting of the American Chemical Society.
Structurally colored radiative cooling cellulosic films
Daytime radiative cooling (DRC) materials offer a sustainable approach to thermal management by exploiting net positive heat transfer to deep space. While such materials typically have a white or mirror-like appearance to maximize solar reflection, extending the palette of available colors is required to promote their real-world utilization. However, the incorporation of conventional absorption-based colorants inevitably leads to solar heating, which counteracts any radiative cooling effect. In this work, efficient sub-ambient DRC (Day: −4 °C, Night: −11 °C) from a vibrant, structurally colored film prepared from naturally derived cellulose nanocrystals (CNCs), is instead demonstrated. Arising from the underlying photonic nanostructure, the film selectively reflects visible light resulting in intense, fade-resistant coloration, while maintaining a low solar absorption (~3%). Additionally, a high emission within the mid-infrared atmospheric window (>90%) allows for significant radiative heat loss. By coating such CNC films onto a highly scattering, porous ethylcellulose (EC) base layer, any sunlight that penetrates the CNC layer is backscattered by the EC layer below, achieving broadband solar reflection and vibrant structural color simultaneously. Finally, scalable manufacturing using a commercially relevant roll-to-roll process validates the potential to produce such colored radiative cooling materials at a large scale from a low-cost and sustainable feedstock.