Heated mirror reveals hidden 3D patterns in rising air near a wall

Heat transfer from a heated surface depends partly on the thin layer of air that warms and rises beside it. As this natural convection boundary layer develops, its flow can change from orderly patterns to turbulence, influencing heat transfer. Observing its three-dimensional (3D) organization close to the surface is difficult: the wall blocks the multiple viewing directions required for volumetric optical measurements. Earlier experiments largely captured point measurements or two-dimensional slices; near-wall structures have often been examined through simulations.

Addressing this challenge, first author Shogo Ogasawara conducted the research in Takuma Kogawa's laboratory at the National Institute of Technology, Hachinohe College, Japan, in collaboration with Dr. Masahito Akamine from the Department of Aeronautics and Astronautics, The University of Tokyo. Kogawa is now an Associate Professor at the College of Engineering, Shibaura Institute of Technology, Japan. The team adapted the mirror-assisted three-dimensional background-oriented schlieren framework proposed by Akamine and colleagues in 2023 to measurements of a natural convection boundary layer along a heated vertical wall. The researchers used a mirror-finished aluminum plate, 12 synchronized cameras and two 4K display monitors showing random-dot patterns. By comparing consecutive synchronized images acquired after the wall temperature had stabilized, rather than using an unheated reference image, they suppressed much of the quasi-steady optical distortion caused by heat-induced wall warping. The images were separated by 33.3 milliseconds. Their findings were published online on October 1, 2026, and will be published in Volume 180 of the journal International Communications in Heat and Mass Transfer on November 1, 2026.

The method reconstructed changes in air density over each short interval, rather than the instantaneous density field. The team compared these finite-time density changes at different local Rayleigh numbers, a measure of buoyancy-driven flow. Upstream, the reconstructed regions appeared as elongated, gently undulating sheets with spanwise coherence, resembling rolls aligned across the wall. Farther downstream, the patterns tilted, fragmented and paired, becoming more complex and extended in the streamwise direction.

“Using the heated wall as a mirror helps recover viewing paths normally blocked by the wall, allowing us to examine near-wall structures in three dimensions,” said Dr. Kogawa. “We can observe how regions of changing air density reorganize as the boundary layer develops.”

The researchers quantified how density changes varied across the measurement region. Their integrated fluctuation measure increased downstream to a local Rayleigh number of about 1.6 × 10⁹ and then approached a plateau with a slight decline. Considering this trend with the spatial patterns, they identified a transition range corresponding to local Grashof numbers of 1.44 × 10⁹–2.16 × 10⁹. This was broadly consistent with classical transition criteria, although transition estimates depend on the measured quantity and method. Correlation-length analysis also showed a shift from spanwise-dominant to streamwise-dominant organization.

“Natural convection matters wherever heat must be transferred without fans or other forced airflow,” said Dr. Kogawa. “Experimental access to near-wall structures can help researchers assess computational fluid dynamics simulations and investigate heat transfer in passively cooled equipment and buildings.”

Applications include cooling electronics, power devices, battery packs and solar panels, and understanding heat exchange at building walls, windows and radiant panels. BOS uses cameras and background patterns rather than lasers or tracer particles, with potential for other wall-bounded variable-density flows.

By adapting mirror-assisted imaging to a heated wall, the researchers obtained experimental access to near-wall patterns that are difficult to resolve using conventional optical measurements. Their contribution combines a way to reduce the effect of heat-induced mirror deformation with three-dimensional observations of how density-change structures reorganize downstream. The shift from spanwise-coherent sheets to fragmented, streamwise-extended patterns was also supported by fluctuation statistics and correlation-length analysis. These results provide a basis for investigating buoyancy-driven flow structures and comparing them with numerical predictions. The measurements represent finite-time density changes, and quantitative interpretation of local amplitudes and fine-scale features requires further independent validation.

***

Reference
Title of original paper: Visualization of near-wall three-dimensional structures in a natural convection boundary layer via mirror-assisted three-dimensional background-oriented schlieren

Journal: International Communications in Heat and Mass Transfer

DOI: 10.1016/j.icheatmasstransfer.2026.112606

About Shibaura Institute of Technology (SIT), Japan
Shibaura Institute of Technology (SIT) is a private university with campuses in Tokyo and Saitama. Since the establishment of its predecessor, Tokyo Higher School of Industry and Commerce, in 1927, it has maintained “learning through practice” as its philosophy in the education of engineers. SIT was the only private science and engineering university selected for the Top Global University Project sponsored by the Ministry of Education, Culture, Sports, Science and Technology and had received support from the ministry for 10 years starting from the 2014 academic year. Its motto, “Nurturing engineers who learn from society and contribute to society,” reflects its mission of fostering scientists and engineers who can contribute to the sustainable growth of the world by exposing their over 9,500 students to culturally diverse environments, where they learn to cope, collaborate, and relate with fellow students from around the world.

Website: https://www.shibaura-it.ac.jp/en/

About Associate Professor Takuma Kogawa from SIT, Japan
Dr. Takuma Kogawa is an Associate Professor at the College of Engineering, Shibaura Institute of Technology, Japan. He earned his Ph.D. in Engineering from Tohoku University. He directs the Social Thermal Applications and Engineering Laboratory located at the Toyosu Campus. Dr. Kogawa specializes in heat transfer, fluid mechanics and thermal engineering. His work integrates theoretical physics, advanced numerical simulations (like computational fluid dynamics) and precision experimental optical measurements. His core skills and expertise encompass Large Eddy Simulation, radiative transfer, natural convection and turbulence modeling.

Funding Information
The authors gratefully acknowledge financial support from JSPS KAKENHI (Grant Number 24K17221). The authors also acknowledge the support of the experimental facilities provided by the National Institute of Technology, Hachinohe College.